Dormer S2367/16 7648821 End Mill 4FL 7/16 inch
- Write a review
$92.78
Basic StandardDORMER"CoatingTiAlNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)7/16Connection diameter - inch (DCON MS)0.4375Connection diameter - millimeter (DCON MS)11.11Cut lengthLongCutting diameter - fractional inch (DC)7/16Cutting diameter - inch (DC)0.4375Cutting diameter - millimeter (DC)11.11Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)2EDP number7648821Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steelMID number7648821Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS2367/16Overall length - fractional inch (OAL)4"Overall length - inch (OAL)4Overall length - millimeter (OAL)101.6Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER" |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 7/16 |
| Connection diameter - inch (DCON MS) | 0.4375 |
| Connection diameter - millimeter (DCON MS) | 11.11 |
| Cut length | Long |
| Cutting diameter - fractional inch (DC) | 7/16 |
| Cutting diameter - inch (DC) | 0.4375 |
| Cutting diameter - millimeter (DC) | 11.11 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 2 |
| EDP number | 7648821 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel |
| MID number | 7648821 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S2367/16 |
| Overall length - fractional inch (OAL) | 4" |
| Overall length - inch (OAL) | 4 |
| Overall length - millimeter (OAL) | 101.6 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648821
