Dormer E289M5 7174064 Machine Forming Tap Oil Grooves and Internal Coolant 5FL M5 x 0.80 mm
- Write a review
$62.37
Basic StandardDIN 2174Clamping Length - millimeter (LSC)8Clamping width - inch0.1929Clamping width - millimeter (WSC)4.9CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Coolant exit style (CXSC)radial exitCoolant supply property (CSP)1EDP number47174064Flute count (NOF)5Flute Geometry (FDC)Oil Grooves Geometry (Threadforming)Hand (Cutting direction)RightMaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7174064Ordering code ANSIE289M5Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Premachined hole diameter - inch (PHD)0.1811Premachined hole diameter - millimeter (PHD)4.6ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3.5Thread diameter size (TDZ)5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0315Thread pitch - millimeter (TP)0.8Threading length - inch (THL)0.5118Threading length - millimeter (THL)13Usable length (ULDR)3.5Usable Length - inch (LU)0.9843Usable Length - millimeter (LU)25
Specifications
| Basic Standard | DIN 2174 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - inch | 0.1929 |
| Clamping width - millimeter (WSC) | 4.9 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Coolant exit style (CXSC) | radial exit |
| Coolant supply property (CSP) | 1 |
| EDP number | 47174064 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Oil Grooves Geometry (Threadforming) |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7174064 |
| Ordering code ANSI | E289M5 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Premachined hole diameter - inch (PHD) | 0.1811 |
| Premachined hole diameter - millimeter (PHD) | 4.6 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3.5 |
| Thread diameter size (TDZ) | 5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0315 |
| Thread pitch - millimeter (TP) | 0.8 |
| Threading length - inch (THL) | 0.5118 |
| Threading length - millimeter (THL) | 13 |
| Usable length (ULDR) | 3.5 |
| Usable Length - inch (LU) | 0.9843 |
| Usable Length - millimeter (LU) | 25 |
7174064
