Pramet LNMU 160708SR-M:8215 6941410 Milling Insert - Square Shoulder
- Write a review
$16.48
Coating0.012Coating process0.004Coating property (CTP)1Cooling effectMCorner radius - inch (RE)8215Corner radius - millimeter (RE)PVDCutting edge length - inch (L)0.654Cutting edge length - millimeter (L)16.6Depth of cut maximum - inch (APMX)0.512Depth of cut maximum - millimeter (APMX)13Feed maximal - millimeter0.3Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.012Feed_MIN_IMP_NUM0.3Fixing hole diameter - inch (D1)0.224Fixing hole diameter - millimeter (D1)5.7Insert cutting diameter - millimeter (CDI)7.5Insert diameter - inch (INSD)0.52Insert diameter - millimeter (INSD)13.2Insert shape code (SC)L - rectangularInsert thickness - inch (S)0.8Insert thickness - millimeter (S)7.5Insert width - inch (W1)0.52Insert width - millimeter (W1)13.2Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Slightly negative effect on tool life
Specifications
| Coating | 0.012 |
| Coating process | 0.004 |
| Coating property (CTP) | 1 |
| Cooling effect | M |
| Corner radius - inch (RE) | 8215 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge length - inch (L) | 0.654 |
| Cutting edge length - millimeter (L) | 16.6 |
| Depth of cut maximum - inch (APMX) | 0.512 |
| Depth of cut maximum - millimeter (APMX) | 13 |
| Feed maximal - millimeter | 0.3 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.012 |
| Feed_MIN_IMP_NUM | 0.3 |
| Fixing hole diameter - inch (D1) | 0.224 |
| Fixing hole diameter - millimeter (D1) | 5.7 |
| Insert cutting diameter - millimeter (CDI) | 7.5 |
| Insert diameter - inch (INSD) | 0.52 |
| Insert diameter - millimeter (INSD) | 13.2 |
| Insert shape code (SC) | L - rectangular |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 7.5 |
| Insert width - inch (W1) | 0.52 |
| Insert width - millimeter (W1) | 13.2 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
6941410
