Pramet CNMA 434:T5305 6755735 Turning Insert - Negative
- Write a review
$9.58
ChipbreakerNo chipbreakerCoatingT5305Coating processMT-CVDCoating property (CTP)1Cooling effectSlightly positive effect on tool lifeCorner radius - inch (RE)0.063Corner radius - millimeter (RE)1.6Cutting edge length - inch (L)0.508Cutting edge length - millimeter (L)12.9Depth of cut maximum - inch (APMX)0.331Depth of cut maximum - millimeter (APMX)8.4Depth of cut minimum - inch (APMN)0.063Depth of cut minimum - millimeter (APMN)1.6Feed maximal - millimeter0.6Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.024Feed_MIN_IMP_NUM0.004Fixing hole diameter - inch (D1)0.203Fixing hole diameter - millimeter (D1)5.16Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert thickness - millimeter (S)4.76
Specifications
| Chipbreaker | No chipbreaker |
| Coating | T5305 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Slightly positive effect on tool life |
| Corner radius - inch (RE) | 0.063 |
| Corner radius - millimeter (RE) | 1.6 |
| Cutting edge length - inch (L) | 0.508 |
| Cutting edge length - millimeter (L) | 12.9 |
| Depth of cut maximum - inch (APMX) | 0.331 |
| Depth of cut maximum - millimeter (APMX) | 8.4 |
| Depth of cut minimum - inch (APMN) | 0.063 |
| Depth of cut minimum - millimeter (APMN) | 1.6 |
| Feed maximal - millimeter | 0.6 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.024 |
| Feed_MIN_IMP_NUM | 0.004 |
| Fixing hole diameter - inch (D1) | 0.203 |
| Fixing hole diameter - millimeter (D1) | 5.16 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert thickness - millimeter (S) | 4.76 |
6755735
