Dormer J28016.0-14 6821353 G(BSP) Thread Mill Spiral Flute 10° 1/2 INCH . 5/8 INCH X 14
- Write a review
$555.24
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Cutting diameter - inch (DC)0.6299Cutting diameter - millimeter (DC)16Depth of cut maximum - inch (APMX)1.1811Depth of cut maximum - millimeter (APMX)30EDP number46821353Flute count (NOF)5Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)10Hand (Cutting direction)RightMaterialHMMID number6821353Ordering code ANSIJ28016.0-14Overall length - inch (OAL)3.622Overall length - millimeter (OAL)92ShankCylindrical shank DIN 6535 HAThread diameter size (TDZ)1/2, 5/8Thread form (THFT)G - British standard pipe fastening - G seriesThreads per inch (TPI)14Usable length (ULDR)1.5
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Cutting diameter - inch (DC) | 0.6299 |
| Cutting diameter - millimeter (DC) | 16 |
| Depth of cut maximum - inch (APMX) | 1.1811 |
| Depth of cut maximum - millimeter (APMX) | 30 |
| EDP number | 46821353 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 10 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821353 |
| Ordering code ANSI | J28016.0-14 |
| Overall length - inch (OAL) | 3.622 |
| Overall length - millimeter (OAL) | 92 |
| Shank | Cylindrical shank DIN 6535 HA |
| Thread diameter size (TDZ) | 1/2, 5/8 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threads per inch (TPI) | 14 |
| Usable length (ULDR) | 1.5 |
6821353