Dormer EX301 5974070 UNF Machine Tap Spiral Flute 45° 4FL 1 inch x 12
- Write a review
$200.64
Basic StandardDIN 2184-1Clamping Length - millimeter (LSC)17Clamping width - inch0.5709Clamping width - millimeter (WSC)25.4CoatingBrightConnection diameter - inch (DCON MS)18Connection diameter - millimeter (DCON MS)14.5EDP number168424Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5974070Ordering code ANSIEX301Overall length - inch (OAL)6.2992Overall length - millimeter (OAL)160Premachined hole diameter - inch (PHD)0.9154Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)1Thread diameter - millimeter (TD)23.25Thread diameter size (TDZ)1"Thread form (THFT)UNF - Unified FineThreading length - inch (THL)1.1811Threading length - millimeter (THL)30Threads per inch (TPI)12Tolerance limitH6Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 2184-1 |
| Clamping Length - millimeter (LSC) | 17 |
| Clamping width - inch | 0.5709 |
| Clamping width - millimeter (WSC) | 25.4 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 18 |
| Connection diameter - millimeter (DCON MS) | 14.5 |
| EDP number | 168424 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5974070 |
| Ordering code ANSI | EX301 |
| Overall length - inch (OAL) | 6.2992 |
| Overall length - millimeter (OAL) | 160 |
| Premachined hole diameter - inch (PHD) | 0.9154 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 1 |
| Thread diameter - millimeter (TD) | 23.25 |
| Thread diameter size (TDZ) | 1" |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 1.1811 |
| Threading length - millimeter (THL) | 30 |
| Threads per inch (TPI) | 12 |
| Tolerance limit | H6 |
| Usable length (ULDR) | 2.5 |
5974070