Dormer S52310.0XR0.5 6706746 Corner Radius End Mill 10.00 mm x 0.5 mm
- Write a review
$126.91
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Corner radius - inch (RE)0.0197Corner radius - millimeter (RE)0.5Cut lengthShortCutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number46706746Flute count (NOF)4Flute helix angle (FHA)40MaterialHMMaterial applicationH - Hardened materialsMID number6706746Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS52310.0XR0.5Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-6ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Corner radius - inch (RE) | 0.0197 |
| Corner radius - millimeter (RE) | 0.5 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 46706746 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706746 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S52310.0XR0.5 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -6 |
| Shank | Cylindrical shank DIN 6535 HA |
6706746
