Dormer S1394.5 7648874 Ball-Nosed End Mill 4.50 mm
- Write a review
$22.00
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.1969Connection diameter - millimeter (DCON MS)5Corner radius - inch (RE)0.089Corner radius - millimeter (RE)2.25Cut lengthMediumCutting diameter - inch (DC)0.1772Cutting diameter - millimeter (DC)4.5Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - inch (APMX)0.5512Depth of cut maximum - millimeter (APMX)14EDP number7648874Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648874Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1394.5Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1969 |
| Connection diameter - millimeter (DCON MS) | 5 |
| Corner radius - inch (RE) | 0.089 |
| Corner radius - millimeter (RE) | 2.25 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.1772 |
| Cutting diameter - millimeter (DC) | 4.5 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - inch (APMX) | 0.5512 |
| Depth of cut maximum - millimeter (APMX) | 14 |
| EDP number | 7648874 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648874 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1394.5 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648874
