Dormer J20511.6X2.0 6821295 Thread Mill Spiral Flute 10° Oil Feed M14 x 2.00 mm
- Write a review
$460.64
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Coolant exit style (CXSC)axial concentric exitCoolant supply property (CSP)1Cutting diameter - inch (DC)0.4567Cutting diameter - millimeter (DC)11.6Depth of cut maximum - millimeter (APMX)30EDP number46821295Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)10Hand (Cutting direction)RightMaterialHMMID number6821295Ordering code ANSIJ20511.6X2.0Overall length - inch (OAL)3.622Overall length - millimeter (OAL)92ShankCylindrical shank DIN 6535 HBThread diameter size (TDZ)M14Thread form (THFT)M - Metric coarseThread pitch - millimeter (TP)2Usable length (ULDR)2Usable Length - millimeter (LU)32.2
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Coolant exit style (CXSC) | axial concentric exit |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.4567 |
| Cutting diameter - millimeter (DC) | 11.6 |
| Depth of cut maximum - millimeter (APMX) | 30 |
| EDP number | 46821295 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 10 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821295 |
| Ordering code ANSI | J20511.6X2.0 |
| Overall length - inch (OAL) | 3.622 |
| Overall length - millimeter (OAL) | 92 |
| Shank | Cylindrical shank DIN 6535 HB |
| Thread diameter size (TDZ) | M14 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - millimeter (TP) | 2 |
| Usable length (ULDR) | 2 |
| Usable Length - millimeter (LU) | 32.2 |
6821295