Dormer A217N3 5969415 120° Centre Drill - 82° Short ANSI N3
- Write a review
$6.31
ApplicationAngleIcon_DICT_SELCenter drilling 82°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)1/4Connection diameter - inch (DCON MS)0.25Connection diameter - millimeter (DCON MS)6.35Cutting diameter - inch (DC)0.1094"Cutting diameter - millimeter (DC)2.78EDP number239230Hand (Cutting direction)RightInternal designation number3Length chip flute - fractional inch (LCF)5/8Length chip flute - inch (LCF)0.625MaterialHSSMaterial applicationK - Cast iron, P - Steel and cast steelMID number5969415Ordering code ANSIA217N3Overall length - fractional inch (OAL)2Overall length - millimeter (OAL)50.8Point Angle (SIG)120ShankCylindrical shankStep included angle (STA)82Usable length (ULDR)1
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 82° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/4 |
| Connection diameter - inch (DCON MS) | 0.25 |
| Connection diameter - millimeter (DCON MS) | 6.35 |
| Cutting diameter - inch (DC) | 0.1094" |
| Cutting diameter - millimeter (DC) | 2.78 |
| EDP number | 239230 |
| Hand (Cutting direction) | Right |
| Internal designation number | 3 |
| Length chip flute - fractional inch (LCF) | 5/8 |
| Length chip flute - inch (LCF) | 0.625 |
| Material | HSS |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5969415 |
| Ordering code ANSI | A217N3 |
| Overall length - fractional inch (OAL) | 2 |
| Overall length - millimeter (OAL) | 50.8 |
| Point Angle (SIG) | 120 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 82 |
| Usable length (ULDR) | 1 |
5969415
