Dormer S26214.0XR3.0 6706954 Corner Radius End Mill 14.00 mm x 3.0 mm
- Write a review
$200.36
Basic StandardDORMERCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.5512Connection diameter - millimeter (DCON MS)14Corner radius - inch (RE)0.1181Corner radius - millimeter (RE)3Cut lengthShortCutting diameter - inch (DC)0.5512Cutting diameter - millimeter (DC)14Cutting diameter tolerance class (TCDC)h9Cutting pitch differential (CPDF)1Depth of cut maximum - inch (APMX)1.2598Depth of cut maximum - millimeter (APMX)32EDP number46706954Flute count (NOF)4Flute helix angle (FHA)40MaterialHMMaterial applicationH - Hardened materials, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number6706954Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS26214.0XR3.0Overall length - inch (OAL)3.2677Overall length - millimeter (OAL)83Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)4ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.5512 |
| Connection diameter - millimeter (DCON MS) | 14 |
| Corner radius - inch (RE) | 0.1181 |
| Corner radius - millimeter (RE) | 3 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.5512 |
| Cutting diameter - millimeter (DC) | 14 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Cutting pitch differential (CPDF) | 1 |
| Depth of cut maximum - inch (APMX) | 1.2598 |
| Depth of cut maximum - millimeter (APMX) | 32 |
| EDP number | 46706954 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material | HM |
| Material application | H - Hardened materials, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 6706954 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S26214.0XR3.0 |
| Overall length - inch (OAL) | 3.2677 |
| Overall length - millimeter (OAL) | 83 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 4 |
| Shank | Cylindrical shank DIN 6535 HA |
6706954
