Dormer E5471.1/4NO1 5976365 G(BSP) Machine Tap Straight Flute 6FL 1.1/4 inch x 11
- Write a review
$326.66
Basic StandardISO 2284Clamping Length - millimeter (LSC)28Clamping width - fractional inch (WSC)25Clamping width - inch0.9843CoatingBrightConnection diameter - inch (DCON MS)1.2402Connection diameter - millimeter (DCON MS)31.5Coolant supply property (CSP)41.91EDP number157336Flute count (NOF)6Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976365Ordering code ANSIE5471.1/4NO1Overall length - inch (OAL)4.685Overall length - millimeter (OAL)119Premachined hole diameter - inch (PHD)1.5551Premachined hole diameter - millimeter (PHD)39.5ShankCylindrical shank with SquareThread diameter - inch (TD)1.65Thread diameter - millimeter (TD)41.91Thread diameter size (TDZ)1.1/4Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)1.4173Threading length - millimeter (THL)36Threads per inch (TPI)11Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 2284 |
| Clamping Length - millimeter (LSC) | 28 |
| Clamping width - fractional inch (WSC) | 25 |
| Clamping width - inch | 0.9843 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 1.2402 |
| Connection diameter - millimeter (DCON MS) | 31.5 |
| Coolant supply property (CSP) | 41.91 |
| EDP number | 157336 |
| Flute count (NOF) | 6 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976365 |
| Ordering code ANSI | E5471.1/4NO1 |
| Overall length - inch (OAL) | 4.685 |
| Overall length - millimeter (OAL) | 119 |
| Premachined hole diameter - inch (PHD) | 1.5551 |
| Premachined hole diameter - millimeter (PHD) | 39.5 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 1.65 |
| Thread diameter - millimeter (TD) | 41.91 |
| Thread diameter size (TDZ) | 1.1/4 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 1.4173 |
| Threading length - millimeter (THL) | 36 |
| Threads per inch (TPI) | 11 |
| Usable length (ULDR) | 1.5 |
5976365
