Dormer S813HA16.0 5983611 Slot Drill N 6527 L 16.00 mm
- Write a review
$182.73
Basic StandardDIN 6527 LCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Connection diameter tolerance machine side (TCDCONMS)h6Corner chamfer width - millimeter (CHW)0.2Cut lengthShortCutting diameter - inch (DC)0.6299Cutting diameter - millimeter (DC)16Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)1.0236Depth of cut maximum - millimeter (APMX)26EDP number642306Flute count (NOF)3Flute helix angle (FHA)28MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5983611Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS813HA16.0Overall length - inch (OAL)3.622Overall length - millimeter (OAL)92Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)9ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DIN 6527 L |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Corner chamfer width - millimeter (CHW) | 0.2 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.6299 |
| Cutting diameter - millimeter (DC) | 16 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 1.0236 |
| Depth of cut maximum - millimeter (APMX) | 26 |
| EDP number | 642306 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 28 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5983611 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S813HA16.0 |
| Overall length - inch (OAL) | 3.622 |
| Overall length - millimeter (OAL) | 92 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 9 |
| Shank | Cylindrical shank DIN 6535 HA |
5983611
