Dormer S6103.0XD3 6706592 End Mill 3.00 mm x 3.0 mm
- Write a review
$42.60
Basic StandardDORMERCoatingPolishedConnection diameter - inch (DCON MS)0.1181Connection diameter - millimeter (DCON MS)3Corner radius - inch (RE)0.0039Corner radius - millimeter (RE)0.1Cut lengthShortCutting diameter - inch (DC)0.1181Cutting diameter - millimeter (DC)3Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.3543Depth of cut maximum - millimeter (APMX)9EDP number46706592Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationN - Non-ferrous metalsMID number6706592Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIS6103.0XD3Overall length - inch (OAL)1.5748Overall length - millimeter (OAL)40Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)20ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | Polished |
| Connection diameter - inch (DCON MS) | 0.1181 |
| Connection diameter - millimeter (DCON MS) | 3 |
| Corner radius - inch (RE) | 0.0039 |
| Corner radius - millimeter (RE) | 0.1 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.1181 |
| Cutting diameter - millimeter (DC) | 3 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.3543 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| EDP number | 46706592 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 6706592 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | S6103.0XD3 |
| Overall length - inch (OAL) | 1.5748 |
| Overall length - millimeter (OAL) | 40 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 20 |
| Shank | Cylindrical shank DIN 6535 HA |
6706592
