Dormer R453N21 5979867 140° Coolant Drill N21
- Write a review
$146.60
ApplicationAngleIcon_DICT_SELDrill point 140°Basic StandardDIN 6537 LCoatingTiAlNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shank DIN 6535 HAConnection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter (wire gauge size) (DC)N21Cutting diameter - inch (DC)0.1591Cutting diameter - millimeter (DC)4.04Cutting diameter tolerance class (TCDC)m7Drill LengthJobberEDP number40485Hand (Cutting direction)RightLength chip flute - inch (LCF)1.4173Length chip flute - millimeter (LCF)36MaterialHMMID number5979867Ordering code ANSIR453N21Overall length - inch (OAL)2.9134Overall length - millimeter (OAL)74Point Angle (SIG)140Shank length - millimeter (LS)36Spiral formCTWUsable length (ULDR)5
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 140° |
| Basic Standard | DIN 6537 L |
| Coating | TiAlN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank DIN 6535 HA |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter (wire gauge size) (DC) | N21 |
| Cutting diameter - inch (DC) | 0.1591 |
| Cutting diameter - millimeter (DC) | 4.04 |
| Cutting diameter tolerance class (TCDC) | m7 |
| Drill Length | Jobber |
| EDP number | 40485 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 1.4173 |
| Length chip flute - millimeter (LCF) | 36 |
| Material | HM |
| MID number | 5979867 |
| Ordering code ANSI | R453N21 |
| Overall length - inch (OAL) | 2.9134 |
| Overall length - millimeter (OAL) | 74 |
| Point Angle (SIG) | 140 |
| Shank length - millimeter (LS) | 36 |
| Spiral form | CTW |
| Usable length (ULDR) | 5 |
5979867
