Pramet 805D-19-95-S25 6759009 Indexable Drill 5 x D
- Write a review
$533.65
Adjustment limit maximum - millimeter (ADJLX)0.45Adjustment limit minimum - millimeter (ADJLN)0.15Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.984Connection diameter - millimeter (DCON MS)25Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)0.748Cutting diameter - millimeter (DC)19Cutting edge count (CEDC)1Depth of cut maximum - inch (APMX)3.7402Depth of cut maximum - millimeter (APMX)95Flange diameter - millimeter (DF)35Overall length - inch (OAL)6.929Overall length - millimeter (OAL)176Protruding length - inch (LPR)4.7244Protruding length - millimeter (LPR)120ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.2047Shank length - millimeter (LS)56Usable length (ULDR)5Usable Length - inch (LU)3.9567Usable Length - millimeter (LU)100.5
Specifications
| Adjustment limit maximum - millimeter (ADJLX) | 0.45 |
| Adjustment limit minimum - millimeter (ADJLN) | 0.15 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.984 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.748 |
| Cutting diameter - millimeter (DC) | 19 |
| Cutting edge count (CEDC) | 1 |
| Depth of cut maximum - inch (APMX) | 3.7402 |
| Depth of cut maximum - millimeter (APMX) | 95 |
| Flange diameter - millimeter (DF) | 35 |
| Overall length - inch (OAL) | 6.929 |
| Overall length - millimeter (OAL) | 176 |
| Protruding length - inch (LPR) | 4.7244 |
| Protruding length - millimeter (LPR) | 120 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.2047 |
| Shank length - millimeter (LS) | 56 |
| Usable length (ULDR) | 5 |
| Usable Length - inch (LU) | 3.9567 |
| Usable Length - millimeter (LU) | 100.5 |
6759009
