Dormer C50020.0 5985042 Ball-Nosed End Mill 20.00 mm
- Write a review
$146.80
Basic StandardDIN 327 DCoatingBrightConnection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20Corner radius - inch (RE)0.3937Corner radius - millimeter (RE)10Cut lengthExtra shortCutting diameter - inch (DC)0.7874Cutting diameter - millimeter (DC)20Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number73209Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-EMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5985042Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.7677Neck diameter - millimeter (DN)19.5Ordering code ANSIC50020.0Overall length - inch (OAL)3.4646Overall length - millimeter (OAL)88Peripheral effective cutting edge count (ZEFP)2Profile radius - millimeter (PRFRAD)0Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)37.5
Specifications
| Basic Standard | DIN 327 D |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Corner radius - inch (RE) | 0.3937 |
| Corner radius - millimeter (RE) | 10 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.7874 |
| Cutting diameter - millimeter (DC) | 20 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 73209 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5985042 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.7677 |
| Neck diameter - millimeter (DN) | 19.5 |
| Ordering code ANSI | C50020.0 |
| Overall length - inch (OAL) | 3.4646 |
| Overall length - millimeter (OAL) | 88 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Profile radius - millimeter (PRFRAD) | 0 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 37.5 |
5985042
