Pramet TNMG 333-RM:T9335 6754982 Turning Insert - Negative
- Write a review
$8.36
ChipbreakerRMCoatingT9335Coating processMT-CVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.047Corner radius - millimeter (RE)1.2Cutting edge length - inch (L)0.65Cutting edge length - millimeter (L)16.5Depth of cut maximum - inch (APMX)0.209Depth of cut maximum - millimeter (APMX)5.3Depth of cut minimum - inch (APMN)0.059Depth of cut minimum - millimeter (APMN)1.5Feed maximal - millimeter0.65Feed minimal - millimeter0.25Feed_MAX_IMP_NUM0.026Feed_MIN_IMP_NUM0.01Fixing hole diameter - inch (D1)0.15Fixing hole diameter - millimeter (D1)3.81Inscribed circle diameter - inch (IC)0.375Inscribed circle diameter - millimeter (IC)9.525Insert thickness - millimeter (S)4.76
Specifications
| Chipbreaker | RM |
| Coating | T9335 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.047 |
| Corner radius - millimeter (RE) | 1.2 |
| Cutting edge length - inch (L) | 0.65 |
| Cutting edge length - millimeter (L) | 16.5 |
| Depth of cut maximum - inch (APMX) | 0.209 |
| Depth of cut maximum - millimeter (APMX) | 5.3 |
| Depth of cut minimum - inch (APMN) | 0.059 |
| Depth of cut minimum - millimeter (APMN) | 1.5 |
| Feed maximal - millimeter | 0.65 |
| Feed minimal - millimeter | 0.25 |
| Feed_MAX_IMP_NUM | 0.026 |
| Feed_MIN_IMP_NUM | 0.01 |
| Fixing hole diameter - inch (D1) | 0.15 |
| Fixing hole diameter - millimeter (D1) | 3.81 |
| Inscribed circle diameter - inch (IC) | 0.375 |
| Inscribed circle diameter - millimeter (IC) | 9.525 |
| Insert thickness - millimeter (S) | 4.76 |
6754982
