Dormer E631M16 7350270 Machine Tap White Shark for Cast Iron Full Bottoming 4FL M16 x 2.00 mm
- Write a review
$101.37
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)14Clamping width - inch0.358Clamping width - millimeter (WSC)1CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.48Connection diameter - millimeter (DCON MS)12.19Coolant exit style (CXSC)axial concentric exitCooling (CSP)1EDP number7350270Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metalsMID number7350270Ordering code ANSIE631M16Overall length - inch (OAL)4.3307Overall length - millimeter (OAL)110Premachined hole diameter - imperial (PHD)35/64Premachined hole diameter - inch (PHD)0.5512Premachined hole diameter - millimeter (PHD)14ShankCylindrical shank with SquareTap chamfer style (TCS)E 1.5 - 2Thread diameter - millimeter (TD)35/64Thread diameter size (TDZ)16Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0787Thread pitch - millimeter (TP)2Threading length - inch (THL)0.9055Threading length - millimeter (THL)23Tolerance limitD7Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 14 |
| Clamping width - inch | 0.358 |
| Clamping width - millimeter (WSC) | 1 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.48 |
| Connection diameter - millimeter (DCON MS) | 12.19 |
| Coolant exit style (CXSC) | axial concentric exit |
| Cooling (CSP) | 1 |
| EDP number | 7350270 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals |
| MID number | 7350270 |
| Ordering code ANSI | E631M16 |
| Overall length - inch (OAL) | 4.3307 |
| Overall length - millimeter (OAL) | 110 |
| Premachined hole diameter - imperial (PHD) | 35/64 |
| Premachined hole diameter - inch (PHD) | 0.5512 |
| Premachined hole diameter - millimeter (PHD) | 14 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | E 1.5 - 2 |
| Thread diameter - millimeter (TD) | 35/64 |
| Thread diameter size (TDZ) | 16 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0787 |
| Thread pitch - millimeter (TP) | 2 |
| Threading length - inch (THL) | 0.9055 |
| Threading length - millimeter (THL) | 23 |
| Tolerance limit | D7 |
| Usable length (ULDR) | 2.5 |
7350270
