Dormer E513M9X1.0NO3 5977182 Machine Tap Straight Flute 3FL M9 x 1.00 mm
- Write a review
$31.07
Basic StandardISO 529Clamping Length - millimeter (LSC)10Clamping width - fractional inch (WSC)7.1Clamping width - inch0.2795CoatingBrightConnection diameter - inch (DCON MS)0.3543Connection diameter - millimeter (DCON MS)9EDP number96833Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5977182Ordering code ANSIE513M9X1.0NO3Overall length - inch (OAL)2.8346Overall length - millimeter (OAL)72Premachined hole diameter - inch (PHD)0.315Premachined hole diameter - millimeter (PHD)8ShankCylindrical shank with SquareThread diameter size (TDZ)9Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.6299Threading length - millimeter (THL)16Usable length (ULDR)1.5Usable Length - inch (LU)1.1417Usable Length - millimeter (LU)29
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 10 |
| Clamping width - fractional inch (WSC) | 7.1 |
| Clamping width - inch | 0.2795 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3543 |
| Connection diameter - millimeter (DCON MS) | 9 |
| EDP number | 96833 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5977182 |
| Ordering code ANSI | E513M9X1.0NO3 |
| Overall length - inch (OAL) | 2.8346 |
| Overall length - millimeter (OAL) | 72 |
| Premachined hole diameter - inch (PHD) | 0.315 |
| Premachined hole diameter - millimeter (PHD) | 8 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 9 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.6299 |
| Threading length - millimeter (THL) | 16 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 1.1417 |
| Usable Length - millimeter (LU) | 29 |
5977182
