Pramet 16L2R040A16-SZP16-C 7049116 End Milling Cutter - Copy And Profile
- Write a review
$329.03
Axial rake angle (GAMP)-10Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.63Connection diameter - millimeter (DCON MS)16Connection size code machine side (CZC MS)-Coolant supply property (CSP)1Cutting diameter maximum - inch (DCX)0.63Cutting diameter maximum - millimeter (DCX)16Depth of cut maximum - millimeter (APMX)14.4Hand (Cutting direction)RightInsert group used in the toolZP 16Insert index count (NOI)2Maximum ramping angle (RMPX)14.4Not recomendedFinishing - very good surface qualityOverall length - inch (OAL)6.299Overall length - millimeter (OAL)160Peripheral effective cutting edge count (ZEFP)2Possible useRoughingRadial rake angle (GAMF)0Rotational speed maximum (RPMX)20000ShankCylindrical shank DIN 1835AUsable Length - millimeter (LU)40Usable Length maximum - millimeter (LUX)40
Specifications
| Axial rake angle (GAMP) | -10 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.63 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Connection size code machine side (CZC MS) | - |
| Coolant supply property (CSP) | 1 |
| Cutting diameter maximum - inch (DCX) | 0.63 |
| Cutting diameter maximum - millimeter (DCX) | 16 |
| Depth of cut maximum - millimeter (APMX) | 14.4 |
| Hand (Cutting direction) | Right |
| Insert group used in the tool | ZP 16 |
| Insert index count (NOI) | 2 |
| Maximum ramping angle (RMPX) | 14.4 |
| Not recomended | Finishing - very good surface quality |
| Overall length - inch (OAL) | 6.299 |
| Overall length - millimeter (OAL) | 160 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Possible use | Roughing |
| Radial rake angle (GAMF) | 0 |
| Rotational speed maximum (RPMX) | 20000 |
| Shank | Cylindrical shank DIN 1835A |
| Usable Length - millimeter (LU) | 40 |
| Usable Length maximum - millimeter (LUX) | 40 |
7049116
