Dormer A51011/32 5970136 ADX Jobber Drill DIN 338 11/32 inch
- Write a review
$32.70
ApplicationAngleIcon_DICT_SELDrill point 130°Basic StandardDIN 338CoatingTiNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.3437Connection diameter - millimeter (DCON MS)8.73Cutting diameter - fractional inch (DC)11/32Cutting diameter - inch (DC)0.3438Cutting diameter - millimeter (DC)8.73Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number169117Hand (Cutting direction)RightLength chip flute - inch (LCF)3.189Length chip flute - millimeter (LCF)81MaterialHSSMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5970136Ordering code ANSIA51011/32Overall length - inch (OAL)4.9213Overall length - millimeter (OAL)125Point Angle (SIG)130Spiral formQuick Spiral Flute Design 32°- 40°Usable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 130° |
| Basic Standard | DIN 338 |
| Coating | TiN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.3437 |
| Connection diameter - millimeter (DCON MS) | 8.73 |
| Cutting diameter - fractional inch (DC) | 11/32 |
| Cutting diameter - inch (DC) | 0.3438 |
| Cutting diameter - millimeter (DC) | 8.73 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 169117 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 3.189 |
| Length chip flute - millimeter (LCF) | 81 |
| Material | HSS |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5970136 |
| Ordering code ANSI | A51011/32 |
| Overall length - inch (OAL) | 4.9213 |
| Overall length - millimeter (OAL) | 125 |
| Point Angle (SIG) | 130 |
| Spiral form | Quick Spiral Flute Design 32°- 40° |
| Usable length (ULDR) | 4 |
5970136
