Dormer S1341 7648747 End Mill 4FL 1 inch
- Write a review
$225.56
Basic StandardDORMER"CoatingBrightConnection diameter - fractional inch (DCON MS)1Connection diameter - millimeter (DCON MS)25.4Cut lengthMediumCutting diameter - fractional inch (DC)1"Cutting diameter - inch (DC)1Cutting diameter - millimeter (DC)25.4Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1.1/2EDP number7648747Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648747Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1341Overall length - fractional inch (OAL)4"Overall length - inch (OAL)4Overall length - millimeter (OAL)101.6Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER" |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1 |
| Connection diameter - millimeter (DCON MS) | 25.4 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1" |
| Cutting diameter - inch (DC) | 1 |
| Cutting diameter - millimeter (DC) | 25.4 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/2 |
| EDP number | 7648747 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648747 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1341 |
| Overall length - fractional inch (OAL) | 4" |
| Overall length - inch (OAL) | 4 |
| Overall length - millimeter (OAL) | 101.6 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648747
