Dormer E006M16 5973878 Machine Tap Spiral Point M16 x 2.00 mm
- Write a review
$56.27
Basic StandardANSIClamping width - inch0.36CoatingSteam TemperedConnection diameter - inch (DCON MS)0.48Connection diameter - millimeter (DCON MS)12.19EDP number580578Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973878Ordering code ANSIE006M16Overall length - fractional inch (OAL)3.13/16Overall length - inch (OAL)3.8125Overall length - millimeter (OAL)0.48Premachined hole diameter - imperial (PHD)35/64Premachined hole diameter - inch (PHD)0.5512Premachined hole diameter - millimeter (PHD)14ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)35/64Thread diameter size (TDZ)16Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0787Thread pitch - millimeter (TP)2Threading length - inch (THL)0.9843Tolerance limitD7Usable length (ULDR)2.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.36 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 0.48 |
| Connection diameter - millimeter (DCON MS) | 12.19 |
| EDP number | 580578 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973878 |
| Ordering code ANSI | E006M16 |
| Overall length - fractional inch (OAL) | 3.13/16 |
| Overall length - inch (OAL) | 3.8125 |
| Overall length - millimeter (OAL) | 0.48 |
| Premachined hole diameter - imperial (PHD) | 35/64 |
| Premachined hole diameter - inch (PHD) | 0.5512 |
| Premachined hole diameter - millimeter (PHD) | 14 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | 35/64 |
| Thread diameter size (TDZ) | 16 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0787 |
| Thread pitch - millimeter (TP) | 2 |
| Threading length - inch (THL) | 0.9843 |
| Tolerance limit | D7 |
| Usable length (ULDR) | 2.5 |
5973878
