Dormer C94812.0 5985184 Roughing End Mill 12.00 mm
- Write a review
$121.68
Basic StandardDIN 844 LCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)0.4724Connection diameter - millimeter (DCON MS)12Cut lengthLongCutting diameter - inch (DC)0.4724Cutting diameter - millimeter (DC)12Cutting diameter tolerance class (TCDC)k12Depth of cut maximum - inch (APMX)2.0866Depth of cut maximum - millimeter (APMX)53EDP number128626Flute count (NOF)4Flute helix angle (FHA)35MaterialHSS-E-PMMID number5985184Mill ProfileNRA - Coarse Pitch Asymmetrical Rounded Profile ChipbreakerNeck diameter - inch (DN)0.4528Neck diameter - millimeter (DN)11.5Ordering code ANSIC94812.0Overall length - inch (OAL)4.3307Overall length - millimeter (OAL)110Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)64.5
Specifications
| Basic Standard | DIN 844 L |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.4724 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Cut length | Long |
| Cutting diameter - inch (DC) | 0.4724 |
| Cutting diameter - millimeter (DC) | 12 |
| Cutting diameter tolerance class (TCDC) | k12 |
| Depth of cut maximum - inch (APMX) | 2.0866 |
| Depth of cut maximum - millimeter (APMX) | 53 |
| EDP number | 128626 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 35 |
| Material | HSS-E-PM |
| MID number | 5985184 |
| Mill Profile | NRA - Coarse Pitch Asymmetrical Rounded Profile Chipbreaker |
| Neck diameter - inch (DN) | 0.4528 |
| Neck diameter - millimeter (DN) | 11.5 |
| Ordering code ANSI | C94812.0 |
| Overall length - inch (OAL) | 4.3307 |
| Overall length - millimeter (OAL) | 110 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 64.5 |
5985184
