Dormer J2059.9X1.75 6821299 Thread Mill Spiral Flute 10° Oil Feed M12 X 1.75 MM
- Write a review
$351.65
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.5512Connection diameter - millimeter (DCON MS)14Coolant exit style (CXSC)axial concentric exitCoolant supply property (CSP)1Cutting diameter - inch (DC)0.3898Cutting diameter - millimeter (DC)9.9Depth of cut maximum - millimeter (APMX)26.25EDP number46821299Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)10Hand (Cutting direction)RightMaterialHMMID number6821299Ordering code ANSIJ2059.9X1.75Overall length - inch (OAL)3.2677Overall length - millimeter (OAL)83ShankCylindrical shank DIN 6535 HBThread diameter size (TDZ)M12Thread form (THFT)M - Metric coarseThread pitch - millimeter (TP)1.75Usable length (ULDR)2Usable Length - millimeter (LU)28.2
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.5512 |
| Connection diameter - millimeter (DCON MS) | 14 |
| Coolant exit style (CXSC) | axial concentric exit |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.3898 |
| Cutting diameter - millimeter (DC) | 9.9 |
| Depth of cut maximum - millimeter (APMX) | 26.25 |
| EDP number | 46821299 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 10 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821299 |
| Ordering code ANSI | J2059.9X1.75 |
| Overall length - inch (OAL) | 3.2677 |
| Overall length - millimeter (OAL) | 83 |
| Shank | Cylindrical shank DIN 6535 HB |
| Thread diameter size (TDZ) | M12 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - millimeter (TP) | 1.75 |
| Usable length (ULDR) | 2 |
| Usable Length - millimeter (LU) | 28.2 |
6821299