Dormer S22518.0 6706807 Finishing End Mill 18.00 mm
- Write a review
$329.62
Basic StandardDORMERCoatingAlTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.7087Connection diameter - millimeter (DCON MS)18Cut lengthShortCutting diameter - inch (DC)0.7087Cutting diameter - millimeter (DC)18Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)1.378Depth of cut maximum - millimeter (APMX)35EDP number46706807Flute count (NOF)8Flute helix angle (FHA)50MaterialHMMaterial applicationM - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number6706807Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.6693Neck diameter - millimeter (DN)17Ordering code ANSIS22518.0Overall length - inch (OAL)3.937Overall length - millimeter (OAL)100Peripheral effective cutting edge count (ZEFP)8Radial rake angle (GAMF)3ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)53
Specifications
| Basic Standard | DORMER |
| Coating | AlTiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.7087 |
| Connection diameter - millimeter (DCON MS) | 18 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.7087 |
| Cutting diameter - millimeter (DC) | 18 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 1.378 |
| Depth of cut maximum - millimeter (APMX) | 35 |
| EDP number | 46706807 |
| Flute count (NOF) | 8 |
| Flute helix angle (FHA) | 50 |
| Material | HM |
| Material application | M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 6706807 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.6693 |
| Neck diameter - millimeter (DN) | 17 |
| Ordering code ANSI | S22518.0 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 100 |
| Peripheral effective cutting edge count (ZEFP) | 8 |
| Radial rake angle (GAMF) | 3 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 53 |
6706807
