Dormer E9091/4 7350483 Machine Tap Yellow Shark for Low Alloy Steels Plug Style 3FL 1/4 inch x 28
- Write a review
$20.66
Basic StandardDIN/ANSIClamping width - inch0.189CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.255Connection diameter - millimeter (DCON MS)6.48EDP number7350483Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350483Ordering code ANSIE9091/4Overall length - inch (OAL)3.15Overall length - millimeter (OAL)0.255Premachined hole diameter - imperial (PHD)N3Premachined hole diameter - inch (PHD)0.2165Premachined hole diameter - millimeter (PHD)5.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)N3Thread diameter size (TDZ)1/4Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.591Threads per inch (TPI)28Tolerance limitH4Usable length (ULDR)2.5Usable Length - inch (LU)0.984
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.189 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.255 |
| Connection diameter - millimeter (DCON MS) | 6.48 |
| EDP number | 7350483 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350483 |
| Ordering code ANSI | E9091/4 |
| Overall length - inch (OAL) | 3.15 |
| Overall length - millimeter (OAL) | 0.255 |
| Premachined hole diameter - imperial (PHD) | N3 |
| Premachined hole diameter - inch (PHD) | 0.2165 |
| Premachined hole diameter - millimeter (PHD) | 5.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | N3 |
| Thread diameter size (TDZ) | 1/4 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.591 |
| Threads per inch (TPI) | 28 |
| Tolerance limit | H4 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.984 |
7350483