Dormer E0615/8NO6 5974284 Hand Tap Straight Flute UNC 5/8 inch x 11
- Write a review
$84.34
Basic StandardANSIClamping width - fractional inch (WSC)0.48Clamping width - inch0.36CoatingBrightCoating property (CTP)4Connection diameter - inch (DCON MS)3.13/16Connection diameter - millimeter (DCON MS)12.19EDP number348703Flute count (NOF)13.5Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5974284Ordering code ANSIE0615/8NO6Overall length - fractional inch (OAL)3.13/16Overall length - inch (OAL)3.8125Overall length - millimeter (OAL)96.84Premachined hole diameter - inch (PHD)0.5315Premachined hole diameter - millimeter (PHD)17/32ShankCylindrical shank with SquareThread diameter size (TDZ)5/8Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.9843Threads per inch (TPI)11Tolerance limitH3Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 0.48 |
| Clamping width - inch | 0.36 |
| Coating | Bright |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 3.13/16 |
| Connection diameter - millimeter (DCON MS) | 12.19 |
| EDP number | 348703 |
| Flute count (NOF) | 13.5 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5974284 |
| Ordering code ANSI | E0615/8NO6 |
| Overall length - fractional inch (OAL) | 3.13/16 |
| Overall length - inch (OAL) | 3.8125 |
| Overall length - millimeter (OAL) | 96.84 |
| Premachined hole diameter - inch (PHD) | 0.5315 |
| Premachined hole diameter - millimeter (PHD) | 17/32 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 5/8 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.9843 |
| Threads per inch (TPI) | 11 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 1.5 |
5974284
