Dormer S9042.0 5983157 End Mill 2.00 mm
- Write a review
$29.08
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.1181Connection diameter - millimeter (DCON MS)3Corner chamfer width - millimeter (CHW)0.08Cut lengthMediumCutting diameter - inch (DC)0.0787Cutting diameter - millimeter (DC)2Cutting diameter tolerance class (TCDC)h12Depth of cut maximum - inch (APMX)0.2362Depth of cut maximum - millimeter (APMX)6EDP number133125Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983157Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS9042.0Overall length - inch (OAL)1.4961Overall length - millimeter (OAL)38Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1181 |
| Connection diameter - millimeter (DCON MS) | 3 |
| Corner chamfer width - millimeter (CHW) | 0.08 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.0787 |
| Cutting diameter - millimeter (DC) | 2 |
| Cutting diameter tolerance class (TCDC) | h12 |
| Depth of cut maximum - inch (APMX) | 0.2362 |
| Depth of cut maximum - millimeter (APMX) | 6 |
| EDP number | 133125 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983157 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S9042.0 |
| Overall length - inch (OAL) | 1.4961 |
| Overall length - millimeter (OAL) | 38 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 6535 HA |
5983157
