Dormer EX01M14 5973722 Machine Tap Spiral Flute 45° 3FL M14 x 2.00 mm
- Write a review
$59.45
Basic StandardDIN 376Clamping Length - millimeter (LSC)12Clamping width - inch0.3543Clamping width - millimeter (WSC)9CoatingSteam TemperedConnection diameter - inch (DCON MS)11Connection diameter - millimeter (DCON MS)9EDP number137079Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973722Ordering code ANSIEX01M14Overall length - inch (OAL)4.3307Overall length - millimeter (OAL)110Premachined hole diameter - inch (PHD)0.4724Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)12Thread diameter size (TDZ)14Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0787Thread pitch - millimeter (TP)2Threading length - inch (THL)0.7874Threading length - millimeter (THL)20Tolerance limitD7Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 376 |
| Clamping Length - millimeter (LSC) | 12 |
| Clamping width - inch | 0.3543 |
| Clamping width - millimeter (WSC) | 9 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 11 |
| Connection diameter - millimeter (DCON MS) | 9 |
| EDP number | 137079 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973722 |
| Ordering code ANSI | EX01M14 |
| Overall length - inch (OAL) | 4.3307 |
| Overall length - millimeter (OAL) | 110 |
| Premachined hole diameter - inch (PHD) | 0.4724 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 12 |
| Thread diameter size (TDZ) | 14 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0787 |
| Thread pitch - millimeter (TP) | 2 |
| Threading length - inch (THL) | 0.7874 |
| Threading length - millimeter (THL) | 20 |
| Tolerance limit | D7 |
| Usable length (ULDR) | 2.5 |
5973722
