Dormer S248HA1/2X1.1/4XR.030 7648915 Corner Radius End Mill 1/2 inch
- Write a review
$88.89
Basic StandardDORMERCoatingAlTiNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)1/2Connection diameter - inch (DCON MS)0.5Connection diameter - millimeter (DCON MS)12.7Corner radius - inch (RE)0.03Cut lengthMediumCutting diameter - fractional inch (DC)1/2Cutting diameter - inch (DC)0.5Cutting diameter - millimeter (DC)12.7Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1.1/4EDP number7648915Flute count (NOF)5Flute helix unequal1MaterialHMMID number7648915Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS248HA1/2X1.1/4XR.030Overall length - fractional inch (OAL)3"Overall length - inch (OAL)3Overall length - millimeter (OAL)76.2Radial rake angle (GAMF)8ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | AlTiN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 1/2 |
| Connection diameter - inch (DCON MS) | 0.5 |
| Connection diameter - millimeter (DCON MS) | 12.7 |
| Corner radius - inch (RE) | 0.03 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1/2 |
| Cutting diameter - inch (DC) | 0.5 |
| Cutting diameter - millimeter (DC) | 12.7 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/4 |
| EDP number | 7648915 |
| Flute count (NOF) | 5 |
| Flute helix unequal | 1 |
| Material | HM |
| MID number | 7648915 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S248HA1/2X1.1/4XR.030 |
| Overall length - fractional inch (OAL) | 3" |
| Overall length - inch (OAL) | 3 |
| Overall length - millimeter (OAL) | 76.2 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank DIN 6535 HA |
7648915
