Dormer C80012.5X6.0 5985492 T-slot Cutter 12.50 mm x 6.0 mm
- Write a review
$142.34
Basic StandardDIN 851CoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Cutting diameter - inch (DC)0.4921Cutting diameter - millimeter (DC)12.5Cutting diameter tolerance class (TCDC)d11Cutting width - inch (CW)0.2362Cutting width - millimeter (CW)6Depth of cut maximum - inch (APMX)0.2362Depth of cut maximum - millimeter (APMX)6EDP number74442Flute count (NOF)6Flute helix angle (FHA)15Head length - millimeter (LH)15MaterialHSS-EMID number5985492Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.1969Neck diameter - millimeter (DN)5Ordering code ANSIC80012.5X6.0Overall length - inch (OAL)2.2441Overall length - millimeter (OAL)57Peripheral effective cutting edge count (ZEFP)6Radial rake angle (GAMF)10ShankCylindrical shank DIN 1835 B / D
Specifications
| Basic Standard | DIN 851 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Cutting diameter - inch (DC) | 0.4921 |
| Cutting diameter - millimeter (DC) | 12.5 |
| Cutting diameter tolerance class (TCDC) | d11 |
| Cutting width - inch (CW) | 0.2362 |
| Cutting width - millimeter (CW) | 6 |
| Depth of cut maximum - inch (APMX) | 0.2362 |
| Depth of cut maximum - millimeter (APMX) | 6 |
| EDP number | 74442 |
| Flute count (NOF) | 6 |
| Flute helix angle (FHA) | 15 |
| Head length - millimeter (LH) | 15 |
| Material | HSS-E |
| MID number | 5985492 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.1969 |
| Neck diameter - millimeter (DN) | 5 |
| Ordering code ANSI | C80012.5X6.0 |
| Overall length - inch (OAL) | 2.2441 |
| Overall length - millimeter (OAL) | 57 |
| Peripheral effective cutting edge count (ZEFP) | 6 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank DIN 1835 B / D |
5985492