Dormer E806M5 7812147 DIN-ANSI M Machine Tap Black Shark for Hard Alloys Spiral Flute
- Write a review
$32.16
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)7.95Clamping width - inch0.189CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.255Connection diameter - millimeter (DCON MS)6.48Coolant supply property (CSP)N19EDP number7812147Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)15Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steel, S - High-temperature alloysMID number7812147Ordering code ANSIE806M5Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)0.255Premachined hole diameter - imperial (PHD)N19Premachined hole diameter - inch (PHD)0.1654Premachined hole diameter - millimeter (PHD)15Tap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)4.2Thread diameter size (TDZ)5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0315Thread pitch - millimeter (TP)0.8Threading length - inch (THL)0.6693Threading length - millimeter (THL)17Tolerance limitD4Usable length (ULDR)1.5Usable Length - inch (LU)1.0236Usable Length - millimeter (LU)26
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 7.95 |
| Clamping width - inch | 0.189 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.255 |
| Connection diameter - millimeter (DCON MS) | 6.48 |
| Coolant supply property (CSP) | N19 |
| EDP number | 7812147 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 15 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel, S - High-temperature alloys |
| MID number | 7812147 |
| Ordering code ANSI | E806M5 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 0.255 |
| Premachined hole diameter - imperial (PHD) | N19 |
| Premachined hole diameter - inch (PHD) | 0.1654 |
| Premachined hole diameter - millimeter (PHD) | 15 |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 4.2 |
| Thread diameter size (TDZ) | 5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0315 |
| Thread pitch - millimeter (TP) | 0.8 |
| Threading length - inch (THL) | 0.6693 |
| Threading length - millimeter (THL) | 17 |
| Tolerance limit | D4 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 1.0236 |
| Usable Length - millimeter (LU) | 26 |
7812147