Dormer E3821/2 6305849 G(BSP) Machine Tap Spiral Flute 40° Blue Shark 4FL 1/2 inch x 14
- Write a review
$102.42
Basic StandardDIN 5156Clamping Length - millimeter (LSC)15Clamping width - inch0.4724Clamping width - millimeter (WSC)20.96CoatingSteam TemperedConnection diameter - inch (DCON MS)16Connection diameter - millimeter (DCON MS)12EDP number46305849Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steelMID number6305849Ordering code ANSIE3821/2Overall length - inch (OAL)4.9213Overall length - millimeter (OAL)125Premachined hole diameter - inch (PHD)0.748Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.8252Thread diameter - millimeter (TD)19Thread diameter size (TDZ)1/2Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)0.9449Threading length - millimeter (THL)24Threads per inch (TPI)14Usable length (ULDR)2
Specifications
| Basic Standard | DIN 5156 |
| Clamping Length - millimeter (LSC) | 15 |
| Clamping width - inch | 0.4724 |
| Clamping width - millimeter (WSC) | 20.96 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 16 |
| Connection diameter - millimeter (DCON MS) | 12 |
| EDP number | 46305849 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel |
| MID number | 6305849 |
| Ordering code ANSI | E3821/2 |
| Overall length - inch (OAL) | 4.9213 |
| Overall length - millimeter (OAL) | 125 |
| Premachined hole diameter - inch (PHD) | 0.748 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.8252 |
| Thread diameter - millimeter (TD) | 19 |
| Thread diameter size (TDZ) | 1/2 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 0.9449 |
| Threading length - millimeter (THL) | 24 |
| Threads per inch (TPI) | 14 |
| Usable length (ULDR) | 2 |
6305849