Dormer EP01M7 5973446 Machine Tap Spiral Point 3FL M7 x 1.00 mm
- Write a review
$22.48
Basic StandardDIN 371Clamping Length - millimeter (LSC)8Clamping width - fractional inch (WSC)5.5Clamping width - inch0.2165CoatingSteam TemperedConnection diameter - inch (DCON MS)7EDP number136218Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973446Ordering code ANSIEP01M7Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Premachined hole diameter - inch (PHD)0.2362Premachined hole diameter - millimeter (PHD)6ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)7Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.5906Threading length - millimeter (THL)15Tolerance limitD5Usable length (ULDR)2.5Usable Length - inch (LU)1.1811Usable Length - millimeter (LU)30
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - fractional inch (WSC) | 5.5 |
| Clamping width - inch | 0.2165 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 7 |
| EDP number | 136218 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973446 |
| Ordering code ANSI | EP01M7 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Premachined hole diameter - inch (PHD) | 0.2362 |
| Premachined hole diameter - millimeter (PHD) | 6 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 7 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Tolerance limit | D5 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.1811 |
| Usable Length - millimeter (LU) | 30 |
5973446
