Dormer E9097/16 7350486 Machine Tap Yellow Shark for Low Alloy Steels Plug Style 3FL 7/16 inch x 20
- Write a review
$32.79
Basic StandardDIN/ANSIClamping width - inch0.24CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.323Connection diameter - millimeter (DCON MS)8.2EDP number7350486Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350486Ordering code ANSIE9097/16Overall length - inch (OAL)3.937Overall length - millimeter (OAL)0.323Premachined hole diameter - imperial (PHD)25/64Premachined hole diameter - inch (PHD)0.3898Premachined hole diameter - millimeter (PHD)9.9ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)25/64Thread diameter size (TDZ)7/16Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.787Threads per inch (TPI)20Tolerance limitH5Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.24 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.323 |
| Connection diameter - millimeter (DCON MS) | 8.2 |
| EDP number | 7350486 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350486 |
| Ordering code ANSI | E9097/16 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 0.323 |
| Premachined hole diameter - imperial (PHD) | 25/64 |
| Premachined hole diameter - inch (PHD) | 0.3898 |
| Premachined hole diameter - millimeter (PHD) | 9.9 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | 25/64 |
| Thread diameter size (TDZ) | 7/16 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.787 |
| Threads per inch (TPI) | 20 |
| Tolerance limit | H5 |
| Usable length (ULDR) | 2.5 |
7350486