Dormer E011M14X1.0 5974419 Machine Tap Spiral Point 3FL M14 x 1.00 mm
- Write a review
$67.02
Basic StandardISO 529Clamping Length - millimeter (LSC)12Clamping width - fractional inch (WSC)9Clamping width - inch0.3543CoatingSteam TemperedConnection diameter - inch (DCON MS)11.2EDP number568491Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974419Ordering code ANSIE011M14X1.0Overall length - inch (OAL)3.7402Overall length - millimeter (OAL)95Premachined hole diameter - inch (PHD)0.5118Premachined hole diameter - millimeter (PHD)13ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)14Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.9449Threading length - millimeter (THL)24Tolerance limitD7Usable length (ULDR)2.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 12 |
| Clamping width - fractional inch (WSC) | 9 |
| Clamping width - inch | 0.3543 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 11.2 |
| EDP number | 568491 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974419 |
| Ordering code ANSI | E011M14X1.0 |
| Overall length - inch (OAL) | 3.7402 |
| Overall length - millimeter (OAL) | 95 |
| Premachined hole diameter - inch (PHD) | 0.5118 |
| Premachined hole diameter - millimeter (PHD) | 13 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 14 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.9449 |
| Threading length - millimeter (THL) | 24 |
| Tolerance limit | D7 |
| Usable length (ULDR) | 2.5 |
5974419
