Dormer EP305/8 5973848 UNF Machine Tap Spiral Point 3FL 5/8 inch x 18
- Write a review
$92.28
Basic StandardDIN 2184-1Clamping Length - millimeter (LSC)12Clamping width - fractional inch (WSC)9Clamping width - inch0.3543CoatingBrightConnection diameter - inch (DCON MS)12Coolant supply property (CSP)15.875EDP number138434Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5973848Ordering code ANSIEP305/8Overall length - inch (OAL)4.3307Overall length - millimeter (OAL)110Premachined hole diameter - inch (PHD)0.5709Premachined hole diameter - millimeter (PHD)14.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.625Thread diameter - millimeter (TD)15.875Thread diameter size (TDZ)5/8Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.9843Threading length - millimeter (THL)25Threads per inch (TPI)18Tolerance limitH5Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 2184-1 |
| Clamping Length - millimeter (LSC) | 12 |
| Clamping width - fractional inch (WSC) | 9 |
| Clamping width - inch | 0.3543 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 12 |
| Coolant supply property (CSP) | 15.875 |
| EDP number | 138434 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5973848 |
| Ordering code ANSI | EP305/8 |
| Overall length - inch (OAL) | 4.3307 |
| Overall length - millimeter (OAL) | 110 |
| Premachined hole diameter - inch (PHD) | 0.5709 |
| Premachined hole diameter - millimeter (PHD) | 14.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.625 |
| Thread diameter - millimeter (TD) | 15.875 |
| Thread diameter size (TDZ) | 5/8 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.9843 |
| Threading length - millimeter (THL) | 25 |
| Threads per inch (TPI) | 18 |
| Tolerance limit | H5 |
| Usable length (ULDR) | 2.5 |
5973848
