Pramet 802D-28-56-S32 6820777 Indexable Drill 2 x D
- Write a review
$520.28
Adjustment limit maximum - millimeter (ADJLX)0.5Adjustment limit minimum - millimeter (ADJLN)0.3Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.26Connection diameter - millimeter (DCON MS)32Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)1.102Cutting diameter - millimeter (DC)28Cutting edge count (CEDC)1Depth of cut maximum - inch (APMX)2.2047Depth of cut maximum - millimeter (APMX)56Flange diameter - millimeter (DF)42Overall length - inch (OAL)5.945Overall length - millimeter (OAL)151Protruding length - inch (LPR)3.5827Protruding length - millimeter (LPR)91ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.3622Shank length - millimeter (LS)60Usable length (ULDR)2Usable Length - inch (LU)2.5394Usable Length - millimeter (LU)645
Specifications
| Adjustment limit maximum - millimeter (ADJLX) | 0.5 |
| Adjustment limit minimum - millimeter (ADJLN) | 0.3 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.26 |
| Connection diameter - millimeter (DCON MS) | 32 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 1.102 |
| Cutting diameter - millimeter (DC) | 28 |
| Cutting edge count (CEDC) | 1 |
| Depth of cut maximum - inch (APMX) | 2.2047 |
| Depth of cut maximum - millimeter (APMX) | 56 |
| Flange diameter - millimeter (DF) | 42 |
| Overall length - inch (OAL) | 5.945 |
| Overall length - millimeter (OAL) | 151 |
| Protruding length - inch (LPR) | 3.5827 |
| Protruding length - millimeter (LPR) | 91 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.3622 |
| Shank length - millimeter (LS) | 60 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 2.5394 |
| Usable Length - millimeter (LU) | 645 |
6820777
