Dormer E02310-24 5974471 UNC Machine Tap Spiral Flute 45° 3FL No.10 x 24
- Write a review
$27.65
Basic StandardISO 529Clamping Length - millimeter (LSC)7Clamping width - inch0.1575Clamping width - millimeter (WSC)4.826CoatingSteam TemperedConnection diameter - inch (DCON MS)5Connection diameter - millimeter (DCON MS)4EDP number569412Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974471Ordering code ANSIE02310-24Overall length - inch (OAL)2.2835Overall length - millimeter (OAL)58Premachined hole diameter - inch (PHD)0.1535Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.19Thread diameter - millimeter (TD)3.9Thread diameter size (TDZ)10Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.315Threading length - millimeter (THL)8Threads per inch (TPI)24Tolerance limitHH3Usable length (ULDR)2.5Usable Length - inch (LU)0.7874Usable Length - millimeter (LU)20
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 7 |
| Clamping width - inch | 0.1575 |
| Clamping width - millimeter (WSC) | 4.826 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 5 |
| Connection diameter - millimeter (DCON MS) | 4 |
| EDP number | 569412 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974471 |
| Ordering code ANSI | E02310-24 |
| Overall length - inch (OAL) | 2.2835 |
| Overall length - millimeter (OAL) | 58 |
| Premachined hole diameter - inch (PHD) | 0.1535 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.19 |
| Thread diameter - millimeter (TD) | 3.9 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.315 |
| Threading length - millimeter (THL) | 8 |
| Threads per inch (TPI) | 24 |
| Tolerance limit | HH3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.7874 |
| Usable Length - millimeter (LU) | 20 |
5974471
