Dormer E500M45NO1 5976826 Machine Tap Straight Flute 6FL M45 x 4.50 mm
- Write a review
$787.97
Basic StandardISO 529Clamping Length - millimeter (LSC)28Clamping width - fractional inch (WSC)25Clamping width - inch0.9843CoatingBrightConnection diameter - inch (DCON MS)1.2402Connection diameter - millimeter (DCON MS)31.5EDP number154762Flute count (NOF)6Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976749Ordering code ANSIE500M4.5NO1Overall length - inch (OAL)7.3622Overall length - millimeter (OAL)187Premachined hole diameter - inch (PHD)1.5945Premachined hole diameter - millimeter (PHD)40.5ShankCylindrical shank with SquareThread diameter size (TDZ)45Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.1772Thread pitch - millimeter (TP)4.5Threading length - inch (THL)2.126Threading length - millimeter (THL)54Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 28 |
| Clamping width - fractional inch (WSC) | 25 |
| Clamping width - inch | 0.9843 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 1.2402 |
| Connection diameter - millimeter (DCON MS) | 31.5 |
| EDP number | 154762 |
| Flute count (NOF) | 6 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976749 |
| Ordering code ANSI | E500M4.5NO1 |
| Overall length - inch (OAL) | 7.3622 |
| Overall length - millimeter (OAL) | 187 |
| Premachined hole diameter - inch (PHD) | 1.5945 |
| Premachined hole diameter - millimeter (PHD) | 40.5 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 45 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.1772 |
| Thread pitch - millimeter (TP) | 4.5 |
| Threading length - inch (THL) | 2.126 |
| Threading length - millimeter (THL) | 54 |
| Usable length (ULDR) | 1.5 |
5976826
