- New
Dormer E000TINM3 6196635 Machine Tap Spiral Point 3FL M3 x 0.50 mm
- Write a review
$20.89
Basic StandardISO 529Clamping Length - millimeter (LSC)5Clamping width - fractional inch (WSC)2.5Clamping width - inch0.0984CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)3.15EDP number46196635Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6196635Ordering code ANSIE000TINM3Overall length - inch (OAL)1.8898Overall length - millimeter (OAL)48Premachined hole diameter - inch (PHD)0.0984Premachined hole diameter - millimeter (PHD)2.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)3Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0197Thread pitch - millimeter (TP)0.5Threading length - inch (THL)0.5906Threading length - millimeter (THL)15Tolerance limitD3Usable length (ULDR)2.5Usable Length - inch (LU)0.5906Usable Length - millimeter (LU)15
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - fractional inch (WSC) | 2.5 |
| Clamping width - inch | 0.0984 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 3.15 |
| EDP number | 46196635 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6196635 |
| Ordering code ANSI | E000TINM3 |
| Overall length - inch (OAL) | 1.8898 |
| Overall length - millimeter (OAL) | 48 |
| Premachined hole diameter - inch (PHD) | 0.0984 |
| Premachined hole diameter - millimeter (PHD) | 2.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 3 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0197 |
| Thread pitch - millimeter (TP) | 0.5 |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Tolerance limit | D3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.5906 |
| Usable Length - millimeter (LU) | 15 |
6196635
