Dormer E295M6 6305760 M Machine Forming Tap DIN 2174 5FL M6 x 1.00 mm
- Write a review
$47.18
Basic StandardDIN 2174Clamping Length - millimeter (LSC)8Clamping width - inch0.1929Clamping width - millimeter (WSC)4.9CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6EDP number46305760Flute count (NOF)5Flute Geometry (FDC)Fluteless Geometry (Threadforming)Hand (Cutting direction)RightMaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6305760Ordering code ANSIE295M6Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Premachined hole diameter - inch (PHD)0.2165Premachined hole diameter - millimeter (PHD)5.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3.5Thread diameter size (TDZ)6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.5906Threading length - millimeter (THL)15Usable length (ULDR)3Usable Length - inch (LU)1.1811Usable Length - millimeter (LU)30
Specifications
| Basic Standard | DIN 2174 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - inch | 0.1929 |
| Clamping width - millimeter (WSC) | 4.9 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| EDP number | 46305760 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Fluteless Geometry (Threadforming) |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6305760 |
| Ordering code ANSI | E295M6 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Premachined hole diameter - inch (PHD) | 0.2165 |
| Premachined hole diameter - millimeter (PHD) | 5.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3.5 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 1.1811 |
| Usable Length - millimeter (LU) | 30 |
6305760
