2091/4 020016 Oxide 118° Taper Shank Jobber Drill 1/4 inch
- Write a review
$19.70
ApplicationAngleIcon_DICT_SELDrill point 118°Basic StandardANSICoatingSteam TemperedConnection (shank) descriptionMorse Taper ShankConnection size code machine side (CZC MS)1Cutting diameter - fractional inch (DC)1/4Cutting diameter - inch (DC)0.25Cutting diameter - millimeter (DC)6.35Drill LengthJobberHand (Cutting direction)RightLength chip flute - fractional inch (LCF)2.7/8Length chip flute - inch (LCF)2.875MaterialHSSOverall length - fractional inch (OAL)6.1/8Overall length - millimeter (OAL)155.58Point Angle (SIG)118Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 118° |
| Basic Standard | ANSI |
| Coating | Steam Tempered |
| Connection (shank) description | Morse Taper Shank |
| Connection size code machine side (CZC MS) | 1 |
| Cutting diameter - fractional inch (DC) | 1/4 |
| Cutting diameter - inch (DC) | 0.25 |
| Cutting diameter - millimeter (DC) | 6.35 |
| Drill Length | Jobber |
| Hand (Cutting direction) | Right |
| Length chip flute - fractional inch (LCF) | 2.7/8 |
| Length chip flute - inch (LCF) | 2.875 |
| Material | HSS |
| Overall length - fractional inch (OAL) | 6.1/8 |
| Overall length - millimeter (OAL) | 155.58 |
| Point Angle (SIG) | 118 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
2091/4
