Pramet SPET 120408S:M8330 7451034 Milling Insert - Square Shoulder
- Write a review
$14.89
Coating0.016Coating process0.007Coating property (CTP)1Cooling effectWith chipbreaker -no designationCorner radius - inch (RE)M8330Corner radius - millimeter (RE)PVDCutting edge effective length - inch (LE)0.5Cutting edge effective length - millimeter (LE)12.7Cutting edge length - inch (L)0.5Cutting edge length - millimeter (L)12.7Depth of cut maximum - inch (APMX)0.472Depth of cut maximum - millimeter (APMX)12Feed maximal - millimeter0.4Feed minimal - millimeter0.17Feed_MAX_IMP_NUM0.039Feed_MIN_IMP_NUM1Fixing hole diameter - inch (D1)0.217Fixing hole diameter - millimeter (D1)5.5Inscribed circle diameter - inch (IC)0.075Inscribed circle diameter - millimeter (IC)1.9Insert cutting diameter - millimeter (CDI)4.76Insert shape code (SC)S - squareInsert thickness - inch (S)0.8Insert thickness - millimeter (S)4.76m-dimension - inch (M)0.075m-dimension - millimeter (M)1.9Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Slightly negative effect on tool life
Specifications
| Coating | 0.016 |
| Coating process | 0.007 |
| Coating property (CTP) | 1 |
| Cooling effect | With chipbreaker -no designation |
| Corner radius - inch (RE) | M8330 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge effective length - inch (LE) | 0.5 |
| Cutting edge effective length - millimeter (LE) | 12.7 |
| Cutting edge length - inch (L) | 0.5 |
| Cutting edge length - millimeter (L) | 12.7 |
| Depth of cut maximum - inch (APMX) | 0.472 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| Feed maximal - millimeter | 0.4 |
| Feed minimal - millimeter | 0.17 |
| Feed_MAX_IMP_NUM | 0.039 |
| Feed_MIN_IMP_NUM | 1 |
| Fixing hole diameter - inch (D1) | 0.217 |
| Fixing hole diameter - millimeter (D1) | 5.5 |
| Inscribed circle diameter - inch (IC) | 0.075 |
| Inscribed circle diameter - millimeter (IC) | 1.9 |
| Insert cutting diameter - millimeter (CDI) | 4.76 |
| Insert shape code (SC) | S - square |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 4.76 |
| m-dimension - inch (M) | 0.075 |
| m-dimension - millimeter (M) | 1.9 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
7451034
