Whitney Tool 15677 Deep Slotting Cutter With Side Teeth, 10 degree Rake for Non-Ferrous Material, 1-1/2" Cut Diameter, 3/8" Cut
- Write a review
$135.05
CoatingNo CoatingCut Diameter, Inch1-1/2"Cut Diameter, Metric38.1Cut Width3/8"EDP No15677MaterialHigh Speed SteelNeck Diameter0.469Number of Teeth10OD Tolerance0.75Overall Length2-3/8"Shank Dia. Tolerance0Shank Diameter1/2"Shank Length2Shank TypeStraightStyle10° Rake for NON-Ferrous MaterialTooth ConfigurationStraightTypeDeep Slotting CuttersWidth Tolerance0WTC No15677
Specifications
| Auxiliary lip | No |
| Design | CRW1 |
| Housing bore diameter | 65.049 mm, 2.561 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 6.9 m/s |
| Rotational speed | 3300.0 r/min |
| Seal width | 7.95 mm, 0.313 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 39.7 mm, 1.563 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
15677