Dormer E294M3 6305747 Machine Forming Tap Oil Grooves 4FL M3 x 0.50 mm
- Write a review
$40.07
Basic StandardDIN 2174Clamping Length - millimeter (LSC)6Clamping width - inch0.1063Clamping width - millimeter (WSC)2.7CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.1378Connection diameter - millimeter (DCON MS)3.5EDP number46305747Flute count (NOF)4Flute Geometry (FDC)Oil Grooves Geometry (Threadforming)Hand (Cutting direction)RightMaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6305747Ordering code ANSIE294M3Overall length - inch (OAL)2.2047Overall length - millimeter (OAL)56Premachined hole diameter - inch (PHD)0.1102Premachined hole diameter - millimeter (PHD)2.8ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3.5Thread diameter size (TDZ)3Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0197Thread pitch - millimeter (TP)0.5Threading length - inch (THL)0.3543Threading length - millimeter (THL)9Usable length (ULDR)3.5Usable Length - inch (LU)0.7087Usable Length - millimeter (LU)18
Specifications
| Basic Standard | DIN 2174 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - inch | 0.1063 |
| Clamping width - millimeter (WSC) | 2.7 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.1378 |
| Connection diameter - millimeter (DCON MS) | 3.5 |
| EDP number | 46305747 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Oil Grooves Geometry (Threadforming) |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6305747 |
| Ordering code ANSI | E294M3 |
| Overall length - inch (OAL) | 2.2047 |
| Overall length - millimeter (OAL) | 56 |
| Premachined hole diameter - inch (PHD) | 0.1102 |
| Premachined hole diameter - millimeter (PHD) | 2.8 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3.5 |
| Thread diameter size (TDZ) | 3 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0197 |
| Thread pitch - millimeter (TP) | 0.5 |
| Threading length - inch (THL) | 0.3543 |
| Threading length - millimeter (THL) | 9 |
| Usable length (ULDR) | 3.5 |
| Usable Length - inch (LU) | 0.7087 |
| Usable Length - millimeter (LU) | 18 |
6305747
