Dormer A221N3 5969085 118° Centre Drill - 60° Short ANSI N3
- Write a review
$7.42
ApplicationAngleIcon_DICT_SELCenter drilling 60°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)1/4Connection diameter - inch (DCON MS)0.25Connection diameter - millimeter (DCON MS)6.35Cutting diameter - fractional inch (DC)7/64"Cutting diameter - inch (DC)0.1094Cutting diameter - millimeter (DC)2.78EDP number241882Hand (Cutting direction)RightInternal designation number3Length chip flute - fractional inch (LCF)7/64MaterialHSS-EMaterial applicationK - Cast iron, P - Steel and cast steelMID number5969085Ordering code ANSIA221N3Overall length - fractional inch (OAL)2Overall length - millimeter (OAL)50.8Point Angle (SIG)118ShankCylindrical shankStep included angle (STA)60Usable length (ULDR)1.5
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 60° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/4 |
| Connection diameter - inch (DCON MS) | 0.25 |
| Connection diameter - millimeter (DCON MS) | 6.35 |
| Cutting diameter - fractional inch (DC) | 7/64" |
| Cutting diameter - inch (DC) | 0.1094 |
| Cutting diameter - millimeter (DC) | 2.78 |
| EDP number | 241882 |
| Hand (Cutting direction) | Right |
| Internal designation number | 3 |
| Length chip flute - fractional inch (LCF) | 7/64 |
| Material | HSS-E |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5969085 |
| Ordering code ANSI | A221N3 |
| Overall length - fractional inch (OAL) | 2 |
| Overall length - millimeter (OAL) | 50.8 |
| Point Angle (SIG) | 118 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 60 |
| Usable length (ULDR) | 1.5 |
5969085
