Dormer E0216-32 5974354 UNC Machine Tap Spiral Point 3FL No.6 x 32
- Write a review
$25.09
Basic StandardISO 529Clamping Length - millimeter (LSC)5Clamping width - fractional inch (WSC)2.8Clamping width - inch0.1102CoatingSteam TemperedConnection diameter - inch (DCON MS)3.55Coolant supply property (CSP)3.505EDP number569115Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974354Ordering code ANSIE0216-32Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Premachined hole diameter - inch (PHD)0.1122Premachined hole diameter - millimeter (PHD)2.85ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)0.138Thread diameter - millimeter (TD)3.505Thread diameter size (TDZ)6Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.6299Threading length - millimeter (THL)16Threads per inch (TPI)32Tolerance limitH3Usable length (ULDR)2.5Usable Length - inch (LU)0.6299Usable Length - millimeter (LU)16
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - fractional inch (WSC) | 2.8 |
| Clamping width - inch | 0.1102 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 3.55 |
| Coolant supply property (CSP) | 3.505 |
| EDP number | 569115 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974354 |
| Ordering code ANSI | E0216-32 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Premachined hole diameter - inch (PHD) | 0.1122 |
| Premachined hole diameter - millimeter (PHD) | 2.85 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 0.138 |
| Thread diameter - millimeter (TD) | 3.505 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.6299 |
| Threading length - millimeter (THL) | 16 |
| Threads per inch (TPI) | 32 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.6299 |
| Usable Length - millimeter (LU) | 16 |
5974354
